Hopiplaka's Journal

FTMO Trader Scouting
Just continuing to play with trading view.

I had an incorrect long EU scalp setup which was stopped out:
https://www.tradingview.com/v/JVTCU6Uf/

Later that day I went short in line with the downtrend during NYO which hit the take profit level
https://www.tradingview.com/v/a10sX0wJ/
 
It's been a long time since I used the B2OB concept :)

I was reading another thread (http://fxgears.com/forum/index.php/topic,407.msg9491/topicseen.html#new) about opinions to short the USDJPY so I decided to take my spin on it.
Lo and behold a nice B2OB setup

s9Pqk4XB


As a reminder: the B2OB means we hit a S/R line and we see a break in market structure, a confirmation of the reversed trend by another break and a retracement back into an Order Block
 
A B2OB concept using ICT tools:

  • In a downtrend we expect the high of the week to form between Monday and Tuesday's LO, 70% of the time
  • We identify a resistance level which we will hit during that timeframe, either in the form of a 4H or 1H bearish order block, or a key resistance line
  • we wait for a break in market structure on a lower time frame (15MIN) during a kill zone (LO or NYO)
  • The B2OB concept expects a confirmation of the down trend by a second break in MS
  • We want to see a retracement into a lower timeframe (15M) order block which aligns with the OTE zone
  • Take profit around obvious fib extensions

g725LDfc
 
Support & resistance using Renko

For those who have troubles identifying support/resistance levels, trading view (pro plus) users can use the 15Min Renko charts.
Coupled with time of day, OTE and order blocks, trading can be 'easier'.

First open up a renko chart using the 15Min and draw sr lines on all swings
eSxcKNrI


Next switch to a 1Hour bar chart and identify 1 hour order blocks close to where price is
86hVy6zw


When price hits the sr line during a kill zone wait for a reaction and a retracement into a smaller timeframe (5 minutes) OTE, ideally using a hidden ote (using institutional price levels).
3bljn51b
 
At first i thought this renko chart is shit for noobs but i like how u use it marking S&R levels.
 
B2OB on the GU

I made a loss by trading GU too early yesterday (that's the punishment for trading Mondays :) ) but today was the correct setup using the B2OB concept

Price was in the OTE zone while USDX was in a bullish 1H order block.

On the GU we saw a retracement into a 15Min order block, but it was not in the LO kill zone.
There was a nested OTE on the 5Min where we touched a 5 min bearish order block for a nice short.
We saw the break 1, break 2 and back into an order block concept at work, where the OTE zone was the resistance level.


MD7oHmJ7
 
foreigner said:
At what price did you sell GU yesterday Hopi? on what basis?? Cheers F
I had a small setup with a very tight stop loss around 1.6110 level ( a bearish 1H order block, stops placed above the order block), but it wasn't the best setup :)
We were also inside a bullish 1H order block on the USDX but they cleaned the stops during late NYO, beginning LC.
I suspect they will run the stops around 86 level on the USDX, that's why my bias is short this week.
But with FOMC coming up, everything is possible, so I hope my EU setup will generate some sweet pips today.
 
The weekly dealer range and SMT divergence in play yesterday
 

Attachments

  • Screen Shot 2014-10-30 at 07.01.31.png
    Screen Shot 2014-10-30 at 07.01.31.png
    21.3 KB · Views: 113
  • Screen Shot 2014-10-30 at 07.01.40.png
    Screen Shot 2014-10-30 at 07.01.40.png
    21.1 KB · Views: 103
A renko + B2OB example using the NZDUSD for a change, so you can see it works on other pairs as well.

Q8268bM4


[list type=decimal]
[*]Open up a 1H renko chart to draw the near term support/resistance lines (upper right part of picture)
[*]draw the SR lines found on the renko chart to a 5MIN candlestick chart (left part of picture)
[*]Wait for a reaction on the support level
[*]Wait for the break 1 / break 2 and back into an order block structure
[*]Identify a clear support level on the 5 min and align an obvious order block around that number
[*]Use fib extension tool for take profit
[*]Enter around 0.7730, exit close to the 100% extension around 0.7740 for an easy 40 pips
[/list]
 
Weekly dealer range

It's been a while since I updated this thread, so let's continue with an update.

I've been playing a lot with my weekly dealer range concept (based on ICT's central bank dealer range).
Lately I use tradingview to do my analysis but I didn't port the weekly dealer range indicator to pine script yet.
But I've found a much easier way to draw it using just a fib.

Based on the EST setting, the weekly dealer range is drawn using the minimum and maximum price between Friday's 07:00 EST and market close.
In tradingview, you draw a regular fib and change the fib levels to:
[list type=decimal]
[*]0
[*]0.5
[*]1
[*]1.5
[*]2
[*]2.5
[*]-0.5
[*]-1
[*]-1.5
[*]-2
[*]-2.5
[/list]
These are the maximum number of levels you can choose, most of the time they are sufficient for the week, but on strong trends price can move to +/-3.

The levels you now have are the support/resistance lines for the week.
You can save the fib you just draw as a template so you can use it later on in your analysis.

See following example for the GU
iFn7dCvM


Now, to finetune the weekly dealer range, each new day I also draw the midpoint levels of the day. These midpoint levels act as S/R lines as well, especially during the LO to get the best entry.
It's very easy to draw this. Just draw a new fib from two consecutive levels (eg. 0 and 0.5) and you will have the midpoint levels.

Next figure is with the midpoint just after the new day starts (00:00 EST). See how we could use this levels to enter the market during LO and NYO?
VwklH8Bq


Do you see the pip perfect entry points during FOMC and how it aligns with 5Min order blocks?

Last example is of Monday's trading day. Do you see the London express? Do you see the resistance level to enter during NYO? And see what level we hit in the take profit timeframe?
Pip perfect precision I'd say :)
nfdZp5jq


Does it work for other pairs you ask? Check out EU. Although LO just fell short, you could enter during NYO with a 4pip drawdown or at FOMC with 0.5 pip drawdown.
This is a screenshot with the midpoints of the weekly dealer range, so 2 fib's
zVz4M3pX


Let me know what you think, are you as enthusiastic as me :)
 
Re: Weekly dealer range

Hopiplaka said:
Based on the EST setting, the weekly dealer range is drawn using the minimum and maximum price between Friday's 07:00 EST and market close.

Friday 0700 EST to close of market on the same week is less than 1 trading day's data. Or did I read wrongly?
 
Re: Weekly dealer range

palmy said:
Friday 0700 EST to close of market on the same week is less than 1 trading day's data. Or did I read wrongly?
Yes, it's the New York session of the last trading day of the week, just like the last couple of hours per day are used for the daily range.
 
Re: Trade setup 2014 Week 25 USDCHF

Hopiplaka said:
I'm in the middle of developing a nice little indicator which takes all the stress out of trading.
It's the Fib and Order block indicator.

Hi Hop
I have been using my time off during the holidays to go over some threads :nerd: . I was interest to know if you finished this indicator and would you share it. :ponder:

ps. I really enjoy reading your journey and thoughts with great references to ICT material (especially the 2 break market structure from sniper series that I totally missed) :thumbsup: :thumbsup:
 
Re: Trade setup 2014 Week 25 USDCHF


An option is to use/modify SupDem to more closely mimick ICT's concept of OBs.
 
Attached is a chart on "How to identify" Supply and Demand areas, which are slightly different to OBs, although more similarities than differences.

2vcxa1j.jpg
 
Re: Trade setup 2014 Week 25 USDCHF

walshman said:
Hopiplaka said:
I'm in the middle of developing a nice little indicator which takes all the stress out of trading.
It's the Fib and Order block indicator.

Hi Hop
I have been using my time off during the holidays to go over some threads :nerd: . I was interest to know if you finished this indicator and would you share it. :ponder:

ps. I really enjoy reading your journey and thoughts with great references to ICT material (especially the 2 break market structure from sniper series that I totally missed) :thumbsup: :thumbsup:
Hi Walsman,

Sorry for the late reply, was on holiday.

unfortunately I didn't finish the indicator. I was distracted with tradingview and work.
Also the indi gave too many false entries so - although I like the idea :) - I think it will add to the confusion rather than help people.

I think it's better to watch the new Market maker series a few times and trade from a blank chart :D
 
FTMO Trader Scouting
Back
Top